DURAL Trims & Profiles

Products

PVC Trims and Profiles

Tile Trim (Outer Corner Profile)

This product is made out of PVC (Poly Vinyl Chloride) used wherever two tiles meet on an external corner such as a rib on wall and bath steps also enhancing the skirting while provide on top, Totally eliminate the chamfering procedure and saves the manpower. Available in sizes compatible with tile thickness – 7mm,9.5mm,10.5mm,11.5mm.

Click to enlarge the drawing

Inner corner profile

The coving profile made out of quality PVC used at the acute inner corner ( floor to wall, wall to wall) acting as the armor for the inner corners from getting attacked with moss/porous formation and prevents the corner from staining. These profiles are highly useful in areas where liquid flow is more will create the possibility of seepage.

Click to enlarge the drawing
Δ Top

Floor Divider

The all new alignment profile meant to answer all the woes concerning mismatch of marbonite/marble/mosaic laying. Dividers made of rigid PVC available in grey colour this has the definite answer to a even & well aligned floor giving them their breathing space and aesthetic looks. A divider gives a straight- line finish to the floor surface and lessens the usage of excessive grouts. Also permitting for creating custom made designs on the floor area in the form of penciled lines or a checkered floor giving a new dimension to architectural values.

Click to enlarge the drawing

Floor Separator

“L” shaped profile in both PVC is ideally suited for application on floors with tiles / marbonite. Floor separator facilitates perfect alignment, setting right offset in sizes of tiles. Also can be used to protect tile outer corners and gives the corner a perfect line.

Click to enlarge the drawing
Δ Top

Border Profile

Border profiles available in variety of shades to match with the tile pattern. These profiles can be laid vertically or horizontally in between tiles for creating pattern. A right substitute for ceramic pencil tiles. Available 2.5 metre length and 10mm and 20mm width.

Click to enlarge the drawing

Tile Spacer

Tile spacers are small pieces polypropylene used to ensure consistent width of the grout joints and holds the tile securely in a place for quick and accurate installation. Avoids propagation of cracks developed to the adjacent tile. Tile spacers more specifically creating the perfect alignment in the floors giving an impeccable straight line finish that adds tons of value on to the aesthetics of the room.

Click to enlarge the drawing
Δ Top

Cover blocks

The cover blocks made out of poly propylene material at the recommended sizes as per the building standards and it is necessary to provide an effective cover to the reinforcement to ensure the alignment of reinforcement in structural column or beams.

‘F’ Profile (PVC)

The trend setter profile for ideal fixing in lengthy plastered area, profile resembles ‘F’ with trail punches on the extended face that neatly get embedded into the plastered area. Lengthy areas like long corridors, exterior plastering in high rise buildings, auditorium walls tend to develop cracks along the vertical and horizontal sides because of the prevailing extreme tropical weather conditions. The profile act as a breaker in the lengthy areas of plastered walls allowing maximum breathing of walls& keeps retention of heat under control.

Click to enlarge the drawing
Δ Top

Plaster Corner Bead

The plaster bead used to protect and give a formal shape for gypsum plaster having a plaster depth of 4mm and having a flange width of 30mm .It gives plaster to right alignment and protects the wall plastered corners against damage caused by mechanical stress and impact during and after the construction phase.

Click to enlarge the drawing

PVC Guard Self Adhesive

Existing corner guard in PVC compatible for plastered and tiled walls used in vertical applications. Sizes available as 25x25mm and 40x40mm. Prevents further propogation of damaged areas.

Click to enlarge the drawing
© 2015 DURAL Trims & Profiles Pvt Ltd